Teledyne LeCroy SAS Suite User Manual - Manual (Page 293)

SASSuite User Manual Version 6.25
LeCroy Corporation
283
Appendix A: Specifications
Avalanche Systems
Host Requirements Windows 2000 or gretaer; Intel Pentium II processor or
greater; USB port
Recording Memory Size 4 GB for trace capture, timing and control information
Power Requirements 100-250 VAC, 50-60 Hz (universal input), 480W max
Back Panel Connectors AC Power connection, External trigger connections (TRIG
IN/OUT, SMA), USB type "B" host computer connection,
Breakout Board Data Output Connection
Manual Trigger Switch Forces a trigger event when pressed
Basic Trigger Events Primitives, Bus Conditions, FISs, Errors, ATA Commands,
SATA Commands, External Signals, Vendor FIS, Data
Pattern SCSI Operations, SCSI Status, SSP IUs, SMP
Request/Response
Traffic Summary Reports Errors, Primitives, FIS, Frames, Transactions, SCSI
Operations, ATA Commands
Bus Utilization Reports Pending SCSI IOs, Pending ATA IOs, Response Time,
Latency Time, Throughput, Frame Length, Link
Utilization, Data Throughput, Frames Count
Connectors Two (2) 4-port MiniSAS One MiniSAS connector supports up to four initiators, the
second connector supports up to four targets
Indicators Initiator Status (1, 2, 3, 4) Green when receiving frame, Mixed Green/Red during
OOB, Red on error
Initiator Speed (1, 2, 3, 4) Green for 6 Gb/s, Mixed Green/Yellow for 3 Gb/s, Yellow
for 1.5 Gb/s
Target Status (1, 2, 3, 4) Green when receiving frame, Mixed Green/Red during
OOB, Red on error
Target Speed (1, 2, 3, 4) Green for 6 Gb/s, Mixed Green/Yellow for 3 Gb/s, FYellow
for 1.5 Gb/s
Trig/Err Right Green when Channel 1 or 2 are triggered, Red on error
Rec/Upload Right Red when Channel 1 or 3 are recording, Green when
uploading
Trig/Err Left Green when Channel 3 or 4 are triggered, Red on error
Rec/Upload Left Red when Channel 3 or 4 are recording, Green when
uploading