Teledyne LeCroy SAS Suite User Manual - Manual (Page 21)

SASSuite User Manual Version 6.25
LeCroy Corporation
11
BNC Connectors "Ext. In" and "Ext. Out"
These connectors allow BNC cables to be attached to the analyzer for the purpose of
triggering on external input signals or for sending an output signal from the analyzer to
another device. These connectors have the same function as the 25 pin RS-232
connector - i.e., they channel input and output signals but do not support the use of a
breakout board.
Wide range AC connector module
— Power socket
— Power on/off switch
— Enclosed 5x20 mm 2.0A 250 V fast acting glass fuse
Warning! For continued protection against fire, replace fuse only with the type and
rating specified above.