Teledyne LeCroy SAS Suite User Manual - Manual (Page 260)

Version 6.25 SASSuite User Manual
250
LeCroy Corporation
AUTO_WAIT_SAS_BEFORE Settings
AUTO_WAIT_SAS_
BEFORE_
CLOSE_FOR_CLOSE
FALSE When set, the generator will insert WAIT_FOR
CLOSE command right before each CLOSE
primitive.
AUTO_WAIT_SAS_
BEFORE_
SOF_FOR_CREDIT
FALSE When set, the generator will insert WAIT_FOR
CREDIT command right before each SOF
primitive.
AUTO_WAIT_SAS_
BEFORE_
IDENTIFY_FOR_
IDENTIFY_FRAME
FALSE When set, the generator will insert WAIT_FOR
Identify Frame command right before each
Identify Address Frame.
AUTO_WAIT_SAS_
BEFORE_OPEN_
ACCEPT_FOR_OPEN
FALSE When set, the generator will insert WAIT_FOR
Open Frame command right before each
OPEN_ACCEPT primitive.
AUTO_WAIT_SAS_
BEFORE_OPEN_
REJECT_FOR_OPEN
FALSE When set, the generator will insert WAIT_FOR
Open Frame command right before each
OPEN_REJECT primitive.
AUTO_WAIT_SAS_
BEFORE_AIP_FOR_
OPEN
FALSE When set, the generator will insert WAIT_FOR
Open Frame command right before each
primitive of AIP group.
AUTO_WAIT_SAS_
BEFORE_
SMP_RESP_FOR_REQ
FALSE When set, the generator will insert WAIT_FOR
SMP Request Frame command right before
each SMP Response Frame.
AUTO_WAIT_SATA_AFTER Settings
AUTO_WAIT_SATA_
AFTER_X_RDY_FOR_
R_RDY
FALSE When set, the generator will insert WAIT_FOR
SATA_R_RDY command immediately after
each case of SATA_CONT primitive following
SATA_X_RDY primitive.
AUTO_WAIT_SATA_
AFTER_
WTRM_FOR_STATUS
FALSE When set, the generator will insert WAIT_FOR
SATA_R_ERR or SATA_R_OK command
immediately after each case of SATA_CONT
primitive following SATA_WTRM primitive.
AUTO_WAIT_SATA_
AFTER_PMREQ_S_
FOR_RESPONSE
FALSE When set, the generator will insert WAIT_FOR
SATA_PMACK or SATA_PMNAK command
immediately after each case of SATA_CONT
primitive following SATA_PMREQ_S primitive.
Setting
Default
Value Description