Teledyne LeCroy SAS Suite User Manual - Manual (Page 284)

Version 6.25 SASSuite User Manual
274
LeCroy Corporation
About SASSuite details revisions of the following software and hardware:
• SASSuite Software Version, Build Number
• Firmware Version of Analyzer (if connected)
• BusEngine Version, Build Number (if connected)
• Unit Serial Number (if connected)
Note: When contacting LeCroy for technical support, please have available all
the revisions reported in the About SASSuite window.
Software Updates
When a new software release is available, it is posted on the Support page of the LeCroy
website at www.LeCroy.com/support.html.
To update the software, follow these steps:
Step 1 Find the latest released software version on the LeCroy website
under Support.
If you are running the latest version of the software, no further action is
needed.
If you are not running the latest version, continue to Step 3.
Step 2 Download the installer file from the website.
Step 3 Unzip the files into your choice of directory (if required).
Step 4 Click Start, then Run, and browse to where you unzipped the
files.
Step 5 Select the program named Setup and click Open.
Step 6 Click OK to run the Setup and begin the installation.
Step 7 Follow the on-screen instructions to complete the installation.
Step 8 Read the Readme file for important information on changes in
the release.