Teledyne LeCroy SAS Suite User Manual - Manual (Page 261)

SASSuite User Manual Version 6.25
LeCroy Corporation
251
AUTO_WAIT_SATA_
AFTER_PMREQ_P_
FOR_RESPONSE
FALSE When set, the generator will insert WAIT_FOR
SATA_PMACK or SATA_PMNAK command
immediately after each case of SATA_CONT
primitive following SATA_PMREQ_P primitive.
AUTO_WAIT_SATA_
AFTER_
SYNC_FOR_SYNC
FALSE When set, the generator will insert WAIT_FOR
SATA_SYNC command immediately after
each case of SATA_CONT primitive following
SATA_SYNC primitive.
AUTO_WAIT_SATA_BEFORE Settings
AUTO_WAIT_SATA_
BEFORE_
PMACK_FOR_PMREQ
FALSE When set, the generator will insert WAIT_FOR
SATA_PMREQ_S or SATA_PMREQ_P
command right before each SATA_PMACK
primitive.
AUTO_WAIT_SATA_
BEFORE_
PMNAK_FOR_PMREQ
FALSE When set, the generator will insert WAIT_FOR
SATA_PMREQ_S or SATA_PMREQ_P
command right before each SATA_PMNAK
primitive.
AUTO_WAIT_SATA_
BEFORE_
RERR_FOR_WTRM
FALSE When set, the generator will insert WAIT_FOR
SATA_R_ERR command right before each
SATA_WTRM primitive.
AUTO_WAIT_SATA_
BEFORE_
ROK_FOR_WTRM
FALSE When set, the generator will insert WAIT_FOR
SATA_R_OK command right before each
SATA_WTRM primitive.
AUTO_WAIT_SATA_
BEFORE_RIP_FOR_
SOF
FALSE When set, the generator will insert WAIT_FOR
SATA_R_IP command right before each
SATA_SOF primitive.
AUTO_WAIT_SATA_
BEFORE_
R_RDY_FOR_X_RDY
FALSE When set, the generator will insert WAIT_FOR
SATA_X_RDY command right before each
SATA_R_RDY primitive.
Setting
Default
Value Description