Teledyne LeCroy SAS Suite User Manual - Manual (Page 206)

Version 6.25 SASSuite User Manual
196
LeCroy Corporation
Step 8 Uncheck all boxes except for the one for the remote analyzer
that you wish to connect to.
Step 9 Click Close to close the dialog box and establish a connection
to the selected analyzer.
Recording
Multi-Trace
Files
To configure SASTracer analyzers to work as a group (i.e., into a cascade), attach BNC
cables as described in “Setup for Cascaded Multiple Analyzer Use” on page 192, then
perform the following steps:
Step 1 Perform Steps 1 and 2 as described above in “USB Connected
Analyzers” on page 194.
The Analyzer Devices dialog box will open.
Step 2 In the Analyzer Devices dialog box, verify that the checkboxes
are checked for the cascaded analyzers.
Step 3 Click Close.
The dialog closes and the analyzers are selected.
Step 4 Test the setup by recording some traffic.
If the analyzers are not connected by the BNC cables, an error message
will appear prompting you to correct the problem.
Step 5 The SASSuite software will display traffic from each analyzer in
adjacent windows. The windows are synchronized together and
can be scrolled in tandem.
Multi-Trace file before merge - two synchronized trace files