Teledyne LeCroy SAS Suite User Manual - Manual (Page 128)

Version 6.25 SASSuite User Manual
118
LeCroy Corporation
How to
Create an
Event
Sequence
To create an event sequence, you drag event buttons to the Sequence cell, link them
with the action Advance the Sequence, then apply a trigger or other action to the end of
the chain. The following steps illustrate how to create an event sequence.
Step 1 Click the New Event button. The New Event menu opens.
Step 2 Select an event type from the menu, for example an error. A button
appears in the Available Events area.
Step 3 Click the New Event button and select a second event type, for example
a Primitive. At this point, you should see two buttons in the Available
Events area.
Step 4 Drag the first button to the cell marked "Drag an event here to create a
sequence." When you finish, notice how two new cells appear in the
window as shown below the cell where you placed your button.
Step 5 Double-click on the button. A Properties dialog box opens.
Step 6 Select desired options from the dialog box, for example an error
sub-type. The options apply immediately.