Teledyne LeCroy SAS Suite User Manual - Manual (Page 258)

Version 6.25 SASSuite User Manual
248
LeCroy Corporation
SATA Link Init Settings
OOB_SATA_D102_Time 100000 D10.2 time for SATA link synchronization in
OOBIs.During the specified period, the
generator will transmit D10.2 symbols.
OOB_SATA_Align_Time 100000 ALIGN(0) time for SATA link synchronization in
OOBIs.During the specified period, the
generator will transmit ALIGN(0) primitives.
SAS Speed Negotiation Settings
OOB_SAS_Align1_Time 81920 ALIGN(1) time for SAS speed negotiation in
OOBIs.During the specified period, the
generator will transmit ALIGN(1) primitives.
OOB_SAS_Align0_Time 81920 ALIGN(0) time for SAS speed negotiation in
OOBIs.During the specified period, the
generator will transmit ALIGN(0) primitives.
OOB_SAS_Interspeed_
Time
750000 Interspeed time for SAS speed negotiation in
OOBIs.During the specified period, the
generator will keep the line at electric idle.
SATA Speed Negotiation Settings
OOB_SpeedNeg_RCDT 750000 Maximum time in OOBIs during the speed
negotiation window for a transmitter to reply
with ALIGN(1).
OOB_SpeedNeg_SNTT 163840 Time in OOBIs during which ALIGN(0) or
ALIGN(1) is transmitted at each physical link
rate during the speed negotiation sequence.
OOB_SpeedNeg_SNLT 153600 Time in OOBIs during which the transmitter
shall transmit idle between rates during speed
negotiation.
Speed Settings
Speed >>>>> Link Speed Possible Values:
LINK_SPEED_1_5G LINK_SPEED_3G
Default Value: LINK_SPEED_1_5G
RateMatching 0 When set, the generator will automatically
inserting the stream Align(0) primitive after
every dword.
Setting
Default
Value Description