Teledyne LeCroy SAS Suite User Manual - Manual (Page 243)

SASSuite User Manual Version 6.25
LeCroy Corporation
233
Wait
Commands
Syntax: WAIT_FOR { ... ... }
WaitCommand Name Description
WF_TIMEOUT Timeout Credit Available
When WF_TIMEOUT is requested in WAIT_FOR command
the wait session will be released after timeout has elapsed.
The Timeout value can be set two different ways:
1. Through the global WaitTimeout setting that can appear
anywhere in generation. Default value is 1000 microsec-
onds.
Syntax:
Set WaitTimeout = (in microseconds)
2. Through local WaitTimeout value for this specific wait
session.
Syntax:
WAIT_FOR ( ) {
WF_TIMEOUT }
In this case wait for other commands will be released no
later then after number_of_microseconds, but global Wait-
Timeout value remains unchanged for future use.
See Generation\Include\
WaitCommands.inc in your SASTracer program folder for
the samples of syntax.
WF_SOF primitive
WF_EOF primitive
WF_SOAF primitive
WF_EOAF primitive
WF_ACK primitive
WF_NAK_CRC_ERROR primitive
WF_NAK_RESERVED_0 primitive
WF_NAK_RESERVED_1 primitive
WF_NAK_RESERVED_2 primitive