Teledyne LeCroy Kibra DDR - Manual (Page 49)

Kibra DDR Protocol Analyzer User Manual 47
Recording Options Setup Teledyne LeCroy
Figure 2.15: Follow MRS Settings Turned On
Memory Controller
The Memory Controller displays the user selected memory controller parameters. The
selections in this pane determine the appropriate JEDEC Violation Parameters in the
Timing Violation Trigger Pane. Be careful to select values which match the current host
machine and DIMM under test.
The following values are displayed in the Memory Controller pane, see Figure 2.16 on
page 50 .
DIMM Speed
This selects the nominal DIMM speed as provided by the manufacturer. This is different
than the Speed setting, which selects the actual speed that the memory controller is
intended to use. The JEDEC parameters will use a formula to determine the nClk values