Teledyne LeCroy Kibra DDR - Manual (Page 24)

Teledyne LeCroy DDR Interposer
22 Kibra DDR Protocol Analyzer User Manual
Daisy Chaining
To set up the units in a daisy chain:
1. Plug in one end of the CATC Sync cable to the CATC Sync Out connector of one unit,
and the other end to the CATC Sync in connector of another. To connect another
unit continue this chain (see Figure 1.8).
2. The software will recognize the connections automatically.
Figure 1.8: Daisy Chaining Units using CATC Sync Cable and CATC Connectors