Teledyne LeCroy Kibra DDR - Manual (Page 37)

Kibra DDR Protocol Analyzer User Manual 35
Setup Teledyne LeCroy
Figure 2.3: File Menu Options
2.5 Setup
The Setup menu has the following options to setup and configure the device (see
Figure 2.4 on page 36 ):
 Recording Options
 Devices
 Launch CrossSync Control Panel
 Preferences
 Reset Interposers
 Init Phy
Each of these options are described in the following section.
Open Click to open an existing trace or sample files.
Close Click to open an existing trace or sample files.
Save Click to save an existing trace or sample files.
Save as Click to save an existing trace or sample files with a different
name or directory.
Export
To CSV
Export file in .CSV format.
Export
To
DDRX Export file in .DDRX format. Export raw captured data in .DDRX
file format for offline processing. The .DDRX file format is
available to users who would like to process the signal data for
their own analysis. It is a very fast way of getting access to the
data for this purpose. The format of this file is documented in
the app note "DDRX_FileFormat.pdf", which is included in your
installation.
Exit Click to exit the application.