Teledyne LeCroy Kibra DDR - Manual (Page 117)

Kibra DDR Protocol Analyzer User Manual 115
Waveform View Teledyne LeCroy
Go to Next Gap
Goes to the next gap (see See “Gap Markers” on page 131 ).
Go to Previous Gap
Goes to the previous gap (see See “Gap Markers” on page 131 ).
Go to Marker
Allows you to go to specific Marker.
Go to Cursor
Takes you to where the cursor is located. This option is active only in the Waveform View.
Go to Trigger
Go to targets moves the target to the center of the screen.
Go to Time
Displays the GoTo Time dialog to go to a specific time stamp or Clock Count.
Go to Selection
Takes you to the selected point.
Set New Marker
Markers can be inserted for illustrating JEDEC violations. Markers are useful to identify
specific points in the data. By default markers follow a numbering convention but can be
renamed.
Set and Edit New Marker
Displays the Preferences > Marker dialog (see Figure 3.25 on page 118 ).
Place Marker
Moves the selected marker to a new specified position.
Edit This Marker
Enables you to edit a marker.
Edit Marker
Enables you to edit the selected marker (see Figure 3.25 on page 118 ).
Go to Next Transition [Alert]
Takes you to where the next clock transition is located. This option is active only in the
Waveform View.
Go to Previous Transition [Alert]
Takes you to where the previous clock transition is located. This option is active only in
the Waveform View.