Teledyne LeCroy Kibra DDR - Manual (Page 105)

Kibra DDR Protocol Analyzer User Manual 103
Chapter 3
Viewer Display
The Teledyne LeCroy DDR Protocol Suite application displays data in three views,
Waveform, Listing View and Bank State View.
Other analyses available are:
 Timing Calculator (see “Timing Calculator View” on page 144. )
 Traffic Summary (see “Traffic Summary” on page 139 .)
 MR Values (see “Last MRS Values” on page 145 .)
 Timing Violation Analysis (see “Timing Violation Reanalysis” on page 149 .)
3.1 Window Management
You can customize your window for ease of use. You can:
 Double‐click the top blue bar displaying the DDR Protocol Suite and file name to
minimize and maximize the screen.
 The horizontal toolbar can be dragged and placed vertically or horizontally on
either side of the screen.
3.2 Waveform View
The Waveform View for each captured signal can be viewed. In the Waveform View the
clock is the main source for the data being captured. Timing Markers show how long the
clocks are apart. Refer to
Figure 3.1 on page 104 .
The user can collapse/expand multiple signals into Busses (i.e. CMD, ADDR) and zoom and
scroll through waveform data.
3.2.1 Clock Position Selection
The Clock Position Selection synchronizes the position in both views, the Waveform View
and the Listing view. A blue line appears when you click anywhere in the view moving the
clock selector to that position. The movement is synchronized in both views (see the
screen capture below).