Teledyne LeCroy Kibra DDR - Manual (Page 137)

Kibra DDR Protocol Analyzer User Manual 135
Bank State View Teledyne LeCroy
Figure 3.43: Bank State View Legend Display
Active States
The active state of the bank is one of the most interesting features in the analysis of DDR
traces. The DDR Protocol Suite provides detailed information of what happened inside the
bank active state by presenting following information, refer to Figure 3.44.
 The start and end time of bank activation
 The active row address
 Density of Read/Write by drawing a graph with specific color for each type in dif‐
ferent time divisions (*see note below)
 The power down active state when the power down happens in active bank
Figure 3.44: Active State Detail
Figure 3.45: Visually Comparing RD/WR Density in Two Banks
Note: * While calculations involving the numbers of Reads and Writes are used to display the relative
density of these commands during a shown period, the time intervals and durations of these
displayed regions are selected to allow a subjective view of the traffic. This is why the regions
change when zooming in and out.
WR Density
Power Down Active
Active State
Row Address