Teledyne LeCroy Kibra DDR - Manual (Page 47)

Kibra DDR Protocol Analyzer User Manual 45
Recording Options Setup Teledyne LeCroy
DRAM Type
Select the DRAM Type from the following options in the dropdown menu:
For DDR3:
 UDIMM
 SODIMM
 RDIMM
 LRDIMM
 SORDIMM
For DDR4:
 UDIMM
 SOUDIMM
 RDIMM
 LRDIMM
Note: For RDIMMS, the RCD commands will be decoded.
LRDIMM Support
LRDIMMs support two different addressing schemes. When selecting LRDIMM, you must
specify which addressing scheme your system and DIMMs support. Click the checkbox to
select it.
 Use CS2 as A16 in both slots
 Use CS3 as A17 in both slots
Mirrored
Select the Mirrored check‐box to Trigger and Display data correctly for a UDIMM which
has a Mirrored configuration.
ECC
Check the ECC box if your system uses Error Correction Coding.
Encoded
Selecting this checkbox (see Figure 2.14 on page 46 ) for DDR4 LRDIMM or RDIMM
indicates the Encoded Quad CS should be used for mapping ranks. It uses the following
truth table:
CS[0]_n : CS[1]_n : C[0] : Actual Rank
0 : 1 : 0 : Rank 0
0 : 1 : 1 : Rank 1
1 : 0 : 0 : Rank 2
1 : 0 : 1 : Rank 3