Datamax-O'Neil I-Class Operator’s Manual User Manual

Page 86

I-Class

5.6.1 Cleaning the Printhead

CAUTION

NEVER use a sharp, hard or abrasive object on the printhead.

If print quality declines the typical cause can be traced to debris buildup on the printhead;

left unattended, the printhead service life can be reduced. The printer can be programmed
to remind you to perform cleaning (see Section 4.2.2.) Depending upon the media and

printing parameters used, different cleaning methods are recommended.



Note: Streaks can indicate a dirty or faulty printhead.

Proper cleaning is critical. To maintain peak

performance of the printer, Datamax O’Neil offers a
complete line of cleaning products including pens,

cards, films and swabs. Visit our website at
www.datamax-oneil.com to learn more. Certified

Datamax-O’Neil – The worry free choice for
optimal printer performance.

Cotton Swab Procedure

(for users of direct thermal media, or thermal transfer media with

wax ribbon):

A. Turn OFF and unplug the printer. Open the cover. Raise the Printhead Assembly. Allow

the printhead to cool before proceeding.

Cotton

Swab

Debris

Buildup

Burn
Line

Printhead

Latch

Printhead

Assembly

Printhead