Datamax-O'Neil I-Class Operator’s Manual - Manual (Page 46)

36 I-Class
Printer Options (continued)
Menu Item Details
BACKUP LABEL
Positions a presented label for printing (provided the
PRESENT DISTANCE setting is greater than zero),
where:
DISABLED
Disables backup positioning.
ACTIVE LOW
Positions the label when a logic low is received.
ACTIVE HIGH
Positions the label when a logic high is received.
ERR ON PAUSE (APP2)
Sets the output when a service required fault occurs,
where:
ENABLED
Enables the output signal.
DISABLED
Disables the output signal.
4.2.5 System Settings
The System Settings menu contains operating, control, and formatting functions:
Menu Item Details
CONFIGURATION FILE
Controls the creation, storage, and recall of printer
configuration files (see Appendix D), where:
RESTORE AS CURRENT
Lists the files available, and then after selection
reconfigures the printer according to that file.
SAVE SETTING AS
Saves the effective configuration of the printer to a
named file of up to nineteen characters.
DELETE FILE Lists the files available, and then after selection,
removes that file from memory.
 Note: A currently activated file cannot be deleted.
FACTORY SETTING FILE
Lists the files available and then after selection that file
will be restored whenever a Level One reset is
performed; see Section 5.3.2.
NONE Is the currently selected file.