Datamax-O'Neil I-Class Operator’s Manual - Manual (Page 49)

I-Class 39
System Settings (continued)
Menu Item Details
UNLOCK FEATURE
0 0 0 0 0 0 Unlocks a corresponding feature with the entry of the
correct code.
SET FACTORY DEFAULTS
Returns the printer settings to the factory-programmed
values or the Factory Setting File values, where:
SET FACTORY DEFAULT?
CANCEL KEY = YES Overwrites the current configuration and restores the
default configuration (), or if selected the Factory
Setting File. Otherwise, press the ESC Key to keep the
current configuration.
 Note: A reset will occur and, if no Factory Setting
File is used, all settings returned except
CUSTOM ADJUSTMENTS and calibrations.
FORMAT ATTRIBUTES
Defines the way overlapping text, bar codes, and
graphics are printed, where:
XOR
Does not print intersecting areas, for
example:
OPAQUE
Overwrites intersecting areas with
those last formatted, for example:
TRANSPARENT
Prints intersecting areas, for
example:
LABEL ROTATION
Allows the label format to be rotated 180 degrees,
where:
DISABLED
Prints formats without rotation.
ENABLED Prints flipped formats.
IMAGING MODE
Determines the process used to format labels, where:
MULTIPLE LABEL Formats multiple images, as memory permits, to
achieve the fastest throughput.
 Note: Time stamps will indicate the moment of
imaging rather than printing.
SINGLE LABEL Formats an image only after a previous format has been
printed to achieve the most accurate time stamps.
PAUSE MODE
Allows controlled interactive printing, where:
DISABLED
Prints labels without pausing.
ENABLED Requires the user to press the PAUSE Key to print each
label.