Datamax-O'Neil I-Class Operator’s Manual - Manual (Page 13)

I-Class 3
External Keyboard (specify voltage & country requirement when ordering)
A portable terminal for stand-alone printing.
External Media Rewinder (specify voltage requirement when ordering)
A feature-dependant bidirectional
label rewinding device:
• DMXREW1 – rewinds widths up to 4.5 inches (114 mm) into eight-inch (203 mm)
outer diameter rolls on one to four inch (25 to 101 mm) diameter cores at up to ten
inches per second.
•
DMXREW2 – rewinds widths up to 9.5 inches (241 mm) into twelve-inch (304 mm)
outer diameter rolls on a three-inch (76 mm) diameter core at up to thirty inches per
second.
GPI/O Multi-Expansion Card
A slide-in multi-feature circuit card:
•
Flash Memory Expansion – stores up to 8 MB of label formats, fonts, and graphics.
• Real Time Clock – keeps the time and date for labeling functions.
• GPIO Port – controls print functions via an external device (e.g., a label applicator).
• ILPC Fonts (optional) – extends printing capabilities with CG-Times, Kanji Gothic B,
Simplified Chinese GB, Korean Hangul scalable fonts.
•
MCL Serial Port (optional) – allows use with MCL application programs and firmware.
Internal Rewinder
An internal device capable of rewinding six-inch (152 mm) outer diameter rolls of labels or
backing material.
Linear Scanner (unavailable for I-4206; cannot be used with a cutter option)
A CCD device that ensures the readability of bar codes.
Peel and Present Mechanism (requires the Internal Rewinder option)
A device that peels labels from the backing material for immediate application, regulated by
previous label removal [minimum label length is 1.5 inches (38 mm)].
Present Sensor
A device that regulates output to the removal of a previously printed label.