Datamax-O'Neil M-Class Mark II Media Retainer - Manual

92-2470-01 Rev.C
Installation Instructions
The Media Retainer can be used to enhance media tracking when using narrow roll-supplied stocks with large outside
diameters. Install the Media Retainer as follows:
1. Load media as described in your printer’s Operators Manual.
2. Slide
the Media Retainer onto the Media Hub and then, depending upon your printer model, secure it using the
Thumbscrew or Hanger Guide (see the illustrations below ).
1
2
3
1
2
3
Hub Type Printers
DPO15-2872-01
Hanger Type Printers
DPO13-2375-01

Thumbscrew

Media Retainer

Roll Media

Hanger Guide

Media Retainer

Roll Media