Datamax-O'Neil I-Class Operator’s Manual - Manual (Page 33)

I-Class 23
Displayed Message Details
MENU MODE
The Menu Key has been pressed, where:
ENTER PASSWORD
0 0 0 0 Requires entry of the correct security password for
menu access.
KEEP HOST CHANGES?
ENTER=YES Requires a decision regarding existing host commands
that have affected the configuration of the printer,
where pressing ENTER will save these changes or
pressing ESC will discard them.
SAVE CHANGES?
ENTER = YES Requires a decision regarding changes that have been
made to the printer’s settings, where pressing ENTER
will save these changes or pressing ESC will discard
them.
 Note: If required, a reset will automatically occur.
The following designations are used throughout the menu listings below:
Symbol Definition
 Denotes a firmware default setting or value.
Denotes a setting can only be changed via the menu.
4.2.2 Media Settings
The Media Settings menu contains label and ribbon settings, and printhead maintenance
selections.
Menu Item Details
MEDIA TYPE Selects the method used to print labels and should be
set according to the type of media being used, where:
THERMAL TRANSFER
Sets printing for media that requires a ribbon to
produce an image.
DIRECT THERMAL
Sets printing for media that is reactive to heat to
produce an image.