Datamax-O'Neil I-Class Operator’s Manual - Manual (Page 85)

I-Class 75
5.6 Maintenance
The following list and table detail the recommended items, techniques, and schedules to
help you safely and effectively maintain the printer:
•
Isopropyl alcohol
• Cotton swabs
• A clean, lint-free cloth
•
Soft-bristle brush
• Soapy water/mild detergent
•
Compressed air
• Printhead Cleaning Cards or Printhead Cleaning Film
CAUTION
For your safety and to avoid damage, always turn OFF and unplug the
printer before cleaning. Also, take proper precautions when using isopropyl
alcohol – a flammable liquid.
Recommended Cleaning Schedule*
Area / Item(s) Interval** Method / Supplies
Printhead
Thermal transfer media – after each
roll of ribbon; and,
Direct thermal media – after each
roll of media, or as needed.
Isopropyl alcohol; and, if
necessary, Printhead Cleaning
Cards or Printhead Cleaning
Film (see Section 5.6.1).
Rollers
After each roll of labels, after each
roll of ribbon, or as needed.
Cotton swab dampened with
isopropyl alcohol (see Section
5.6.2).
Media Path &
Media Sensor
As needed, based on a weekly visual
inspection.
Compressed air or a soft
brush. Isopropyl alcohol, as
needed.
Exterior Surfaces As needed.
Mild detergent (see Section
5.6.3).
Interior Surfaces As needed.
Soft-brush or compressed air.
Remove all buildup. See
Section 5.6.3.
*For optional equipment, refer to the documentation that accompanied the item(s).
**Whichever interval comes first.