Specifications, 1 general – Datamax-O'Neil I-Class Operator’s Manual User Manual

Page 107

I-Class

Specifications

7.1 General

Bar Codes

Code 39, Interleaved 2 of 5, Code 128 (subsets A, B and C), Codabar, LOGMARS, UPC-A,
UPC-E, UPC 2 & 5 digit addendums, EAN-8, EAN-13, EAN 2 & 5 digit addendums, UPC
Random Weight, Code 93, Plessey, Universal Shipping Container Symbology, Code 128 MOD

43, Postnet, USS/EAN-128 Random Weight, Telepen, USD-8 (Code 11), UPS MaxiCode
(modes 2 & 3), PDF417, Data Matrix, QR Code, Aztec, and MicroPDF417. (See the Class

Series 2 Programmer’s Manual for details.)

Fonts

9 Bit-Mapped Fonts; CG Triumvirate Scalable Font; and, CG Triumvirate Condensed Bold

Scalable Font. (See the Class Series 2 Programmer’s Manual for details.)

Communications

Interfaces: EIA

RS-232/DB-25

Serial & IEEE 1284 Compliant Parallel

Serial Data Rates:

1200, 2400, 4800, 9600, 19.2K, and 38.4K baud.

Handshaking:

Xon / Xoff & CTS / DTR

Parity:

Even, Odd, or None

Stop Bits:

1 or 2

Data Bits:

7 or 8

Electrical

Input Voltage:

90 – 132 or 180 – 264 VAC @ 47–63 Hz, auto-ranging.

Power Consumption:

Typical Operating: 90 Watts; Standby: 10 Watts

Grounding:

Unit must connect to a properly grounded receptacle.