Datamax-O'Neil I-Class Operator’s Manual - Manual (Page 45)

I-Class 35
Printer Options (continued)
Menu Item Details
START OF PRINT
Selects the type of input signal required to initiate
printing, where:
ACTIVE HIGH
Triggers printing with a high signal.
EDGE
Triggers printing with a signal edge transition.
LOW PULSE
Triggers printing with a low pulse.
HIGH PULSE
Triggers printing with a high pulse.
ACTIVE LOW
Triggers printing with a low signal.
END OF PRINT
Sets the type of output signal generated to indicate End
of Print (EOP), where:
LOW PULSE
Outputs a low pulse upon completion.
HIGH PULSE
Outputs a high pulse upon completion.
ACTIVE LOW
Outputs a logic low upon completion.
ACTIVE HIGH
Outputs a logic high upon completion.
RIBBON LOW
Sets the low ribbon signal (as determined by RIBBON
LOW OPTIONS; see Section 4.2.2), where:
ACTIVE LOW
Outputs a logic low when the roll reaches the setting.
ACTIVE HIGH
Outputs a logic high when the roll reaches the setting.
SLEW ENABLE
Selects the type of input signal required to initiate label
slew, where:
STANDARD
Triggers slew with a low signal.
LOW PULSE
Triggers slew with a low pulse.
HIGH PULSE
Triggers slew with a high pulse.
ACTIVE LOW
Triggers slew with a low signal.
ACTIVE HIGH
Triggers slew with a high signal.