Datamax-O'Neil I-Class Operator’s Manual - Manual (Page 66)

56 I-Class
4.3 The Test Menu
The TEST Key accesses six resident format selections that are printed at selected heat and
speed settings (see Section 4.1.4 for printing details).
 Notes: (1) With the exception of the Configuration Label, all test labels require full
width media to capture the entire format.
(2) During a test, press the Key or the Key to stop printing.
(3) Use PRINT TEST RATE (Section 4.2.7) to delay printing.
4.3.1 Print Quality Label
The Print Quality Label can be used to ensure conformance
and visual aesthetics.
4.3.2 Configuration Label
The Configuration Label provides database information, as
detailed in Section 4.2.
 Notes: (1) Label contents vary with application
version, model, and options.
(2) Use at least 2 inch (51mm) wide media and
set the Label Width accordingly (see
Section 4.2.2).
(3) Bulleted items indicate host changes not
yet saved.
PARALLEL PORT A:
PORT DIRECTION:
UNI-DIRECTIONAL
PARALLEL PORT A:
NOT INSTALLED:
COMMUNICATIONS
SERIAL PORT A:
BAUD RATE:
9600 BPS
PROTOCOL:
BOTH
PARITY:
NONE
DATA BITS:
8
STOP BITS:
1
SERIAL PORT B:
NOT INSTALLED
SERIAL PORT C:
NOT INSTALLED
SERIAL PORT D:
NOT INSTALLED
USB PORT:
NOT INSTALLED
SYSTEM INFORMATION
PRINT BUFFER SIZE:
100 in.
FLASH SIZE:
2 MB
RAM TEST:
PASS
OPTIONAL LANGUAGES:
FRANCIAS.DLN
ITALIANO.DLN
DEUTSCH.DLN
ESPANOL.DLN
CONFI
CONFIGURATION
TUE 09:09 AM 29JUL2008
PRINTER KEY:
4308-TB10-020312-001
APPLICATION VERSION:
83-2284-11E4 11.054 07/07/2008
MCL Version: 1.20.02-126
BOOT LOADER:
83-2269-11A 11.01 10/02/2007
UNLOCKED:
*NONE
FPGA:
*
MACO:
NOT SET
MACR:
00-90-c9-01-d0-84