Datamax-O'Neil I-Class Operator’s Manual - Manual (Page 69)

I-Class 59
5
Operating, Adjusting and
Maintaining the Printer
5.1 Displayed Messages
During operation the printer (when not in Menu or Test Mode) displays several types of
information:
• Prompts and Condition Messages (see Section 5.1.1); and,
• Fault and Warning Messages (see Section 6.1.2).
5.1.1 Prompts and Condition Messages
Prompts are alerts to required actions, while Condition Messages are indicators of an
operational state.
Prompts and Condition Messages
Displayed Message Description Action
ACCESS DENIED
The password used to access the
secured menu was incorrect. Enter the correct
password.
CALIBRATION COMPLETE
The FEED Key was pressed and
held.
Allow the calibration to
complete.
CANCEL BATCH
ENTER KEY = YES The CANCEL or TEST Key was
pressed during a multiple label job.
Press ENTER to cancel
all remaining labels in
the job.
CANCEL REPRINT?
ENTER KEY = YES
The CANCEL or TEST Key was
pressed during a fault. (See FAULT
HANDLING / VOID AND RETRY,
Section 4.2.5.)
Press ENTER to cancel
the reprint.
CLEARING FAULTS
The FEED Key was pressed
following a fault and now the
printer is attempting to clear the
condition.
No action is required.