Datamax-O'Neil ANDES 3 Quick Start Guide User Manual
Andes 3, Status indicator led’s, Performing self test
Status Indicator LED’s
Press ON/OFF button (Blue) to turn printer on. Four LED
indicators located on the top of the printer indicate various printer
functions. LED will indicate function as described below:
LED
Status
Condition
Function
Flashing
RS232 serial mode selected
Green
Steady
Communicating with host
Flashing
Bluetooth mode selected
Blue
Steady
Transmitting/Receiving
Flashing
802.11b/g mode selected
Communication
Amber
Steady
Transmitting/Receiving
Error
Red
Steady
Error
Red
Steady
Low Battery
Amber
Steady
Battery being charged
Battery
Green
Steady
Battery charge complete
Green
Steady
Swipe Ready
Magnetic Card
Reader (MCR)
Red
Steady
Swipe Error
Performing Self Test
1. Press and Hold On/Off Button (Blue)
2. While holding On/Off Button, press Paper Feed Button (Black)
Andes 3 Overview
This guide provides a reference illustration of the initial steps to
quickly get your Model Andes 3 up and running. Refer to the
User’s
Guide for more detailed information on the operation and use.
Communication
Battery
Paper Feed Button
On/Off Button
MCR
Error
Copyright © 2010, Datamax-O’Neil. All rights reserved.
www.datamax-oneil.com
Paper
Compartment
Platen
Roller
Paper Door
Unlock Button
Paper
Window
SCR Slot
MCR Slot
Paper Feed
Button
Belt Clip
IrDA
Window
RS232
Port
USB
Port
AC Adaptor
Port
On/Off
Button
Metal
Tear Bar
ANDES 3
Quick Start Guide
7A300009 Rev. A