ABUS FU8007 Secvest 2WAY Base Kit Installation - Manual (Page 89)

89
Select the corresponding function. For a list of functions and their attributes, see the
table below.
Function Meaning
Call Mode Setting for transmitting voice messages.
Primary Telecoms Settings for the primary transmission path of the voice
messages.
Messages Recording of messages for voice messages.
Phone Book Used for entering phone numbers where voice messages
should be sent.
Trigger Used for linking the voice message to a trigger.
Destinations Used for linking the voice message to a phone number.
Call Acknowledge Setting for confirming the voice message.
20.3.1 Call Mode
Function Meaning
Deactivated The voice dialler is deactivated.
Activated The voice dialler is activated.
20.3.2 Primary Telecoms
Select which primary transmission path should be used. This transmission path is used
as long as transmission is possible using it.
20.3.3 Messages
Select the corresponding function. For a list of functions and their attributes, see the
table below.
Function Meaning
Home Message
(approx. 12 sec) Select this function and follow the instructions in the
display. This message is played back at every voice
message transmission. Record the data for the location
of the alarm centre here (name, address, city).
Trigger message 1-4
(each approx. 8 sec) Recording of messages for different triggers. Four
messages are available. For example, record “Fire
alarm”, “Burglar alarm” etc.
At least one home message and one trigger message must be recorded. Do not
forget to save the message following recording.
20.3.4 Phone Book
Enter the phone numbers to be dialled. Phone numbers are assigned to messages
under the “Destinations” menu item. Press the star key to enter a dial pause. The dial
pause is displayed as a comma. Each dial pause interrupts the dial procedure for 3
seconds.
The wireless alarm centre can then be used to enter a name for this number. The
alarm centre shows these names in the phone book so that you can see which
destination was used for the message.
Please note that the last telephone number is designated as the Follow me number.
The wireless centre shows this number in the user menu. The user can enter a new
number in this field. This allows the user to forward all voice messages programmed
for this field.
20.3.5 Trigger
Up to five different triggers can be connected to each voice message using the
wireless alarm centre. A trigger is an option that can be selected from a list of alarm
types.