On off toggle impulse – ABUS FU8007 Secvest 2WAY Base Kit Installation User Manual
Page 66
66
15.4.3.2 Using the remote control
Now program the double-arrow key on the remote control.
Access the user menu as an administrator.
Under System setting, select the Telecommands (remote control) menu point
Select the Edit menu point and press any key on the remote control, or alternatively
select No Telecommands…
When No Telecommands... is selected, you can select a user to receive the new
function here.
Now select the (HW)Output...
Select the Impulse function for output 01.
Go back to the system settings menu and press the double-arrow key
on the remote control to check the settings.
Output 01 now switches for approx. 4 seconds.
MENU
System setting
Select
Close
SYSTEM SETTINGS
Date & Time
Edit Outputs
Telecommands
Call Downloader
Select
Back
TELECOMMANDS
Edit
Delete
Delete All
Select
Back
EDIT TELECOMMAND
Please press the
relevant key on the
telecommand
No Telecommands...
Back
EDIT TELECOMMAND
TC01:User01
TC02:User02
TC03:User03
Select
Back
TC01,T4:User01
Internal activation
Output number
Select
Back
Output number
(HW)Output...
Select
Back
(HW)Output 01
On
Off
Toggle
Impulse
Select
Back