ABUS FU8007 Secvest 2WAY Base Kit Installation - Manual (Page 47)

47
Select the Delete All menu item.
Confirm deletion by pressing Yes .
13.5 Adding the zone 01 detector manually
¾ Select Zone 01 .
Please ensure that no other active detectors are in the tamper state.
¾ You will now be prompted to activate the Tamper contact .
Example: Motion sensor
¾ The detector was successfully trained.
To ensure satisfactory communication, the signal strength should be
more than 3.
Tamper contact
(wall break contact)
Display of
the signal
strength
In the installer menu:
Ж Ж
Select the Add/Del Detectors menu item.