ABUS FU8007 Secvest 2WAY Base Kit Installation - Manual (Page 61)

61
Select the corresponding accessory module (WAM).
In total, up to eight accessory modules can be trained.
Select a module (e.g. WAM 1 ).
Trigger the tamper contact on the WAM.
Trained WAM modules have the symbol next to the WAM number.
Exit the menu by pressing Back .
Select View WAM.
Select WAM 1.
When the WAM is trained, it also transmits its programming so that you can see the
function in which the WAM has been trained under “View WAM”.
Function Meaning
Not Used The universal module is not trained.
1 Wireless Repeater Wireless signals received from trained wireless detectors
(trained in the WAM) are forwarded to the alarm centre
following reception. No other settings have to be made
here.
2 Output Module Up to four WAM relays can be activated from the wireless
alarm centre according to the programming.
3 T/R Module Transmission/receiver module for connecting wired
detectors (water detectors) or a block lock / key switch.
4 Sounder Module For connecting a wired external wireless siren or
compact alarm device.
Check the information of the info module.