ABUS FU8007 Secvest 2WAY Base Kit Installation - Manual (Page 14)

14
2.2 PSTN telephone connection
The alarm centre is connected to the telephone connection as follows.
3. Training the detectors
Call up the installer menu.
Enter a valid installer code (default setting = 7890): 7 8 9 0
It may also be necessary to enter the administrator code 1234 (default).
“You are now in the installer menu”
¾ Select the Detectors menu item.
¾ Select Add/Del Detectors.
¾ Select Zone 01 .
¾ You will now be prompted to activate the Tamper contact . PSTN connection on Secvest 2WAY
Coding
TAE N-plug
a b
White
Brown
Pink
Grey
B1 Ж Е B
A1 Ж Е A