ABUS FU8007 Secvest 2WAY Base Kit Installation - Manual (Page 23)

23
When the sirens have been trained, the alarm centre beeps twice as confirmation.
A message is displayed with the siren confirmation and the signal strength value.
Leave this display by pressing Back.
If a siren has been trained, then the symbol is shown next to the
siren number.
Leave this display by pressing Back.
Select “Edit Ext Siren”.
Select the trained Ext Siren.
If the external siren should be activated when the relevant partition triggers a local or
external alarm, then the partition must be set to Yes.
3.10 Configure a user
Up to 50 users can be configured.
User 01 is always the administrator and cannot be deleted.
Leave the installer menu:
Confirm by pressing Yes .
When exiting the installer menu, the following announcement is played:
“You have exited the installer menu”
Access the user menu by entering the administrator code 1234 (default).
Secvest
Æ
Select Menu and enter the administrator code.