ABUS FU8007 Secvest 2WAY Base Kit Installation - Manual (Page 20)

20
3.7 Forwarding alarm messages over the telephone (speech dialler)
This setting is used for informing the user over the telephone.
Call up the installer menu and select the “Reporting” menu item.
Select the installed telephone connection (PSTN) on the Secvest.
Installed microphone
The recording should contain the following information:
Who is calling:
“Break-in on detector system of Smith family”
Location:
“Sample Street 1 in Sampletown”
This announcement (max. 12 seconds) is made before every other message (1 - 4).
Dictate message 1 - 4 (maximum 8 seconds).
Example: Message 1: “Fire”
Message 2: “Burglary”
Message 3: “Water”
Message 4: “Social care”
In the installer menu:
Æ
Select the Speech Dialler menu item.
In the speech dialler menu:
Æ
Select the Enabled menu item.
In the speech dialler menu:
Æ
Select the PSTN menu item.
In the speech dialler menu:
Æ
Select the Home Messag e menu item.
In the messages menu:
Æ
Start recording by pressing Select.
In the home messages menu:
Æ
Play the recorded message by pressing Select.
In the messages menu:
Æ
Select the Message 1 menu item.