ABUS FU8007 Secvest 2WAY Base Kit Installation - Manual (Page 44)

44
System Options
Perform user functions, select language, restore default
settings, change installer code, define delay and siren times,
configure supervision and jamming detection
IP Network Configure IP settings
Download Configure download settings
Reporting Configure telephone settings, define transmission types
Social Care Set social care, define activation times
Test
Centre and detector test, output test, walk test, wireless
communication
View Log Read the event log
About Panel Read information about software and hardware versions
13. Adding detectors
¾ Select Add/Del Detectors .
Function Meaning
Auto learn If this item is selected, you can walk through your
property and activate the detectors one after the other
(by triggering the tamper contacts). The detectors send a
learn message and the alarm centre now automatically
stores the book-in messages in sequence according to
the zone locations.
Delete All This function is used to delete all trained wireless
detectors and zone attributes.
Zone xx This item can be used to:
a) Manually train a detector for this zone
b) Delete a detector from this zone without deleting
the zone attribute
c) Delete a detector and its zone attribute
13.1 Auto learn
Select Auto learn if you want the wireless alarm centre to dial the first free zone.
¾ Select Auto learn .
¾ You will now be prompted to activate the Tamper contact of the detector.
In the installer menu:
Æ
Select the Detector menu item.