ABUS AZ4110 LCD Keypad for Terxon SX_MX Installation - Manual (Page 195)

91
UK
TELCO2 FAULT RESTORE LR -
ZONE OMIT BB 573
Summary
Event SIA Code CID Code
AC LOST AT 301
AC RESTORE AR 301‡
ALARM ABORT BC 406
ANTI MASK ZONE OPEN (2) BT 380
ANTI MASK ZONE TAMPER (2) BT 380
ANTI MASK ZONE RESTORED (2) BJ 380
AUX TROUBLE YP -
AUX RESTORED YQ -
BATT MISSING YM 311
BATT RESTORED YR 311‡
LOW BATT YT 311
LOW BATT RESTORE YR 311‡
PARTITION RESET OR 305
RESET OR 305
Intermediate
Event SIA Code CID Code
ARM CL 401
DISARM OP 401
KEYSWITCH DISARM OS 409
KEYSWITCH ARM CS 409
Total
Event SIA Code CID Code
DOWNLOAD SUCCESS RS 412
EXPANDER MISSING TA 137
EXPANDER MISSING RESTORE TR 137‡
FORBI MISSING TA 137
FORBI MISSING RESTORE TR 137‡
JAMMING XQ 380
PASSWORD DEFAULTS LOADED RH -
PROG MODE START LB 627
PROG MODE END LS 628
TAMPER USER CODE JA 461
TD (Time and Day) RESET JT 625
TX BATTERY TROUBLE XT 384
USER CODE CHANGED JV -
USER CODE DELETED JX -
(1) If command 143=1 is set then all CID codes are transmitted. If command 143=0 is set then all commands marked by ‡
are not transmitted.
(2) The alarm centre registers an anti-mask event as an anti-mask type lower than it actually is.