ABUS AZ4110 LCD Keypad for Terxon SX_MX Installation - Manual (Page 170)

66
UK
079 Exit delay time internal D
To change the property of the exit delay time for internal
active D:
1. On the control unit, enter: 079
2. The LCD display shows: 079: Exit D=10
3. Via the keypad, select from the following items
and press:
1
Exit D=10
Exit delay time for
internal active D: 10 seconds.
2
Exit D=20
Exit delay time for
internal active D: 20 seconds.
3
Exit D=30
Exit delay time for
internal active D: 30 seconds.
4
Exit D=45
Exit delay time for
internal active D: 45 seconds.
5
Exit D=60
Exit delay time for
internal active D: 60 seconds.
6
Exit D=120
Exit delay time for
internal active D: 120 seconds.
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double “beep” tone and shows Installer Mode.
080 Forbikobler door bell
Proceed as follows to change the property of the
Forbikobler door bell:
1. On the control unit, enter: 080
2. The LCD display shows: 080: Chime OFF
3. Via the keypad, select from the following items
and press:
0
Chime OFF
Pressing the Forbikobler door bell does
not activate the loudspeaker of the
alarm centre.
1
Chime ON
Pressing the Forbikobler door bell
activates the loudspeaker of the alarm
centre.
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double “beep” tone and shows Installer Mode.