ABUS AZ4110 LCD Keypad for Terxon SX_MX Installation - Manual (Page 188)

84
UK
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double “beep” tone and shows Installer Mode.
192 Fast format channel 2
See command 191.
Default setting: Panic to follow
193 Fast format channel 3
See command 191.
Default setting: Burglary to follow
194 Fast format channel 4
See command 191.
Default setting: Active/inactive to follow
195 Fast format channel 5
See command 191.
Default setting: Zone locked
196 Fast format channel 6
See command 191.
Default setting: Alarm cancellation to follow
197 Fast format channel 7
See command 191.
Default setting: Panic to follow
198 Fast format channel 8
See command 191.
Default setting: Technical alarm to follow
201 Prog. entry delay time 1
Define entry delay time 25.40 mm seconds. Proceed as
follows:
1. On the control unit, enter: 201
2. The LCD display shows: 201: Entry 1=20
3. Via the keypad, enter the entry delay time.
4. Confirm your input by pressing. .
5. The control unit acknowledges your input with a
double “beep” tone and shows Installer Mode.
202 Prog. entry delay time 2
Define entry delay time 2 in seconds. Proceed as follows:
1. On the control unit, enter: 202
2. The LCD display shows: 202: Entry 2=20
3. Via the keypad, enter the entry delay time.
4. Confirm your input by pressing. .
5. The control unit acknowledges your input with a
double “beep” tone and shows Installer Mode.
203/204 Prog. entry delay time 3/4
Define entry delay time 3/4 in seconds. Proceed as
follows:
1. On the control unit, enter: 203/204
2. The LCD display shows:
203/204: Entry 3/4=20
3. Via the keypad, enter the entry delay time.
4. Confirm your input by pressing. .
5. The control unit acknowledges your input with a
double “beep” tone and shows Installer Mode.