Printronix SL_T5R Energy Star - Manual (Page 80)

80
Chapter 3 Overview
4. Before saving the modified configuration, you must delete the original
configuration if the Protect Configs. option is enabled.
a. Press the ↑ or ↓ key until the following message displays:
b. Press the + or
−
key to cycle through the options (1-8). When the
desired number displays, press the
↵ key to select it. The following
message displays:
Then, the following displays when it is deleted:
5. Save the new configuration as described in the “Saving a Configuration”
on page 76. Make sure you select the same number (e.g., Config. 1)
when saving the modified configuration. The new configuration writes
over the existing one.
6. Print a copy of this newest configuration and store it in a safe place. Refer
to “Printing a Configuration” on page 81.
Delete Config.
1*
Deleting
Configuration
Delete Config.
X *