Printronix SL_T5R Energy Star - Manual (Page 199)

Emulation Submenus
199
Expanded Fonts (IPDS)
This option specifies which algorithm is used for expanding a character string
in Write Graphics.
• Compatible . A resizing and smoothing algorithm will be performed on the
bitmapped font.
• Scalable (factory default). A substitution will be done to a scalable outline
font. Using Scalable will increase performance and quality, however, the
substitution will only be done for Latin 1 characters of resident bitmapped
fonts, and the type is limited to Courier and Gothic. A scalable font cannot
be selected directly, and an LF3 format cannot be downloaded.
Ext Execute Copy
• Disable (factory default). Dynamic data, overlay data, etc. are not allowed
if the optional Form Count parameter (number of forms to print) is
specified as part of the Execute command. (This setting is IGP-100
compatible.)
• Enable . Dynamic data, overlay data, etc. are allowed within a form where
the Form Count parameter is specified in the Execute command. In this
case, the same form is printed for whatever the Form Count is.
Incremental data is not incremented since the printing page is the same.
The overlay data is only printed with the first form and not on subsequent
forms, and each form is printed on a separate page.
Extended Subset
This item allows selection of the desired extended character subset used by
the printer.
The options are Code Page 437 (factory default) and Code Page 850.
FF After Job
Determines the print position after an operator-initiated local copy (print
screen function).
• Off (factory default). Performs an automatic new line command after
completing a print buffer (unless a new line, form feed, or carriage return
command was the last one executed). The printer is set to print at print
position 1 of the next line.
• On . Performs an automatic form feed command unless a form feed was
the last one executed. The printer is set to print at print position 1 of the
first line on the next form.