Printronix SL_T5R Energy Star - Manual (Page 207)

Emulation Submenus
207
Ignore Spaces
• Disable (factory default). Trailing spaces are not deleted from
alphanumeric elements in a graphics pass.
• Enable . Trailing spaces are deleted from alphanumeric elements in a
graphics pass.
Ignore Text
• Disable (factory default). When disabled, text in normal mode will be
printed. Attributes to be printed depend on the PGL Normal menu setting.
• Enable . When enabled, any line of text (non-PGL commands) in normal
mode will be ignored.
IGP100 Compatibl.
This parameter forces the output to correspond with
IGP-100 printer output in cases where there are differences.
The options are Disable (factory default) and Enable.
Intervention Req
• Send To Host (factory default). The printer sends a signal to the host
computer when a printer fault or hold mode time-out occurs.
NOTE: If you select Send To Host, make sure the Error Recover option
(under MEDIA CONTROL) is set to Disable. If Error Recover is not
set to Disable, Intervention Req will not work properly.
• Do Not Send . No signal will be sent to the host computer.
Italic Print
• Disable (factory default). Text is printed normally.
• Forward Slant . Text is printed with a forward slant.
• Backward Slant . Text is printed with a backward slant.
LAC Approx.
This item controls whether or not the LAC Approximation is used. (See the
Coax/Twinax Programmer’s Reference Manual .)
When set to On, then Approximation is used. When set to Off, Approximation
is not used, and incoming data will print as is. The factory default is On.