Printronix SL_T5R Energy Star - Manual (Page 107)

CONFIG. CONTROL Submenus
107
MEDIA CONTROL
MEDIA
CONTROL
(from page 85)
Print
Intensity
Print
Speed
Print
Mode
6
-3*
-15 to 15
6 ips*
1 to 10 ips 1
Transfer*
Direct
Media
Handling
Tear-Off Strip*
Tear-Off
Peel-Off
Cut
Continuous
Label
Width 7
4.1, 6.6, or 8.5 inches * 2, 4
00.1 to 8.5 inches 4
Ver Image
Shift
0.00 inches* 2
-1.00 to X inches 3
Hor Image
Shift
0.00 inches* 2
-1.00 to 1.00 inches
Orientation
Portrait*
Landscape
Inv. Portrait
Inv. Landscape
Paper Feed
Shift
0.00 inches*
2
-1.00 to X inches 3
Slew Speed
Automatic*
Manual
6 ips
1 to 10 ips
4
Print Direction
Head First*
Foot First
Label Wait
Time
0.1 second*
0.1 to 60.0 seconds
Lbl Missing
Flt
Full Label*
Early Detect
Disable
Clip Page
Enable*
Disable
Error
Recover
Disable*
Enable
Display
Ribbon 6
Enable*
Disable
Ribbon
Width
6
Same as Paper*
Set in Menu
Units
In Inches*
In Millimeters
Ribbon
Low 6
Disable*
Enable
Rbn Takeup
Full 6
Enable*
Disable
Set Label
Length
Manual*
Automatic
Auto Map
Select
Disable*
Enable
Auto Label
Width
4.1, 6.6, or 8.5 inches*
2, 4
00.1 to 8.5 inches 4
Num Auto
Labels
2 labels*
2 to 40 labels 4
Label
Length
7
4 or 6 inches*
2, 4
00.1 to 99.0 inches 5
Pre-Peel
Mode
Disable*
Enable
Pre-Peel
Adjust
1.00 inches*
0.00 to 2.00 inches
Notes:
* = Factory Default
Italicized items are available when Admin User is set to Enable (in the PRINTER CONTROL menu).
1 Maximum value depends on the width of the printer model and printhead.
2 You can change the unit value from inches to millimeters under Units (in MEDIA CONTROL) when Admin User is
enabled.
3 Based on the current value setting for Label Length (in MEDIA CONTROL) up to a maximum of 12.80 inches.
4
Maximum value depends on the width of the printer model (see Appendix A, “Specifications”).
5
Maximum value depends on model width and size of DRAM installed (see Appendix A, “Specifications”).
6 This menu will not appear on Direct Thermal only printers.
7 Resolution changes based on “Label Resolution” menu under MEDIA CONTROL if Small Label Printer option is
installed.
Peel
Present
Next TOF*
End Of Form
End Of Image