TANDBERG Media Processing System MPS 200 - Manual (Page 98)

D 13373.08
NOVEMBER 2007 MPS
Table of
Contents
TANDBERG MPS
ADMINISTRATOR GUIDE
IP Board
Network Configuration
DNS Interfaces, IP Services
DNS Interface 1 and 2
DNS Server defines the network addresses for DNS servers,
interface 1 and 2. Up to 5 addresses may be specified.
If the network addresses are unknown, please contact your
LAN administrator or Internet Service Provider.
The DNS Domain Name is the default domain name suffix
which is added to unqualified names.
IP Services
This is the NTP time server address from which the system
can get updated time information.
The Network Time Protocol (NTP) is used to synchronize •
the time of the system to a reference time server.
The NTP IP setting holds the IP address to a time source •
where the system can get the exact time.
The time server will subsequently be queried every 24th •
hour for time updates.
- continued: IP Configuration
Save - Press the Save button to save changes.
Restart - For the settings to take effect the unit must be restarted after pressing the Save button.
98
Introduction
Quick
Setup
Using
the MPS
System
Status
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Appendices Main
System
Configuration