TANDBERG Media Processing System MPS 200 - Manual (Page 78)

D 13373.08
NOVEMBER 2007 MPS
Table of
Contents
System Status
TANDBERG MPS
ADMINISTRATOR GUIDE
G.703 Board Status
This page gives status information about avail-
able channels and which calls are connected and
recently disconnected.
Red Alarm may indicate that the cable is faulty •
or disconnected.
Sync alert may indicate that the MPS or your •
G.703 network is not correctly configured.
G.703 Board Status
G.703 Board Status
78
Introduction
Quick
Setup
Using
the MPS
System
Configuration
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Appendices Main
System
Status