Programming the group key – Ricoh 2400L User Manual
Page 911

4. Either:
❐
If you want change the label, press
Yes.
Edit the label and press Yes.
❐
If you keep this label, press No.
5. Input a number that you wish to store in
or erase from the group.
Example:
Quick Dial 01: Quick Dial key 01
Speed Dial 30: Speed Dial, 3 and 0 on the
ten key pad.
Full number: Enter it at the ten key pad.
6. Yes.
If "
" ap-
pears, either:
❐
Keep the number: No.
❐
Erase the number Yes.
Go back to step 5.
7. Either:
❐
Store or erase another number: Go to
step 5.
❐
Finish: Function.
❐
To erase a group completely, you must erase every telephone number
from the group individually, using steps 5 and 6.
Programming the Group Key
You can program the 7 Groups. However, there is no room in Quick Dial keys,
this Group key is helphul. You have to program the 30 of the Quick Dial key as
the Group key.
1. Function 3 1 and Yes.
2. Press 3 0 of the Quick Dial key.
3. Yes.
4. Yes.
Quick Dial 3 0 has been programmed
as a Group key.
For how to transmit using the Group key, see page 23.
QUICK DIAL, SPEED DIAL, AND GROUP DIAL
APPENDIX
220