Switch 01 – Ricoh 2400L User Manual
Page 168
The user parameter switches are outlined below. (*: Factory setting)
Switch 00 - Home position settings
Digit
Purpose
0
Do not use this setting.
1
2
Contrast home position
Digit 2 Digit 1 Setting
0 0
Normal *
0 1
Lighten
1 0
Darken
3
Do not use this setting.
4
5
Resolution
Digit 5 Digit 4 Setting
Digit 5 Digit 4 Setting
0 0 Standard*
1 0 Fine
0 1 Detail
1 1 Do not use this.
6
Transmission mode
0: Memory Transmission*
1: Immediate Transmission
7
Halftone
0: Off*
1: On
Switch 01
Digit
Purpose
0 to 6
Do not change these settings.
7
If you change any of the contrast, resolution, transmission mode, or halftone settings
before making a transmission, then:
0: The setting(s) will not return to the home position after the transmission.
1: The setting(s) will return to the home position after the transmission.*
Switch 02 - Printing of various items on received messages
Digit
Purpose
0
Mark to be printed at the receiving side to distinguish messages that are sent from
your machine when it is acting as a forwarding station (Feature Expander required).
0: Off
1: On *
1
Center mark
0: Off*
1: On
The center mark is not printed when the machine is used for making copies.
2
Do not change this setting.
3
TSI printing
0: Off*
1: On
4 to 7
Do not change these settings.
Forwarding Mark
ON/OFF SWITCHES AND USER PARAMETERS
TECHNICAL REFERENCE
158