Ricoh 2400L - Manual (Page 181)

Setting the Date and Time
Your fax machine has an internal clock. It controls the following features.
❐ The time display on the operation panel while the machine is idle.
❐ Operation of time-delay features like Send Later.
❐ The date and time that is printed out on pages that you receive, if Reception
Time is switched on.
❐ The date and time that is printed out at the other end on pages received from
your machine.
Program the correct date and time when you install the machine.
Cross-references:
Send Later: see page 28.
1. Press Function 6 2 2 2 2 9 1 and Yes.
Example: Change to 09 May ’95, at
10:25AM
FRI :*/#/Y
APR 21 1995 01:35PM
2. Change the month using
∗
or # (
∗
to
scroll forward, or # to scroll backward)
on the ten keypad and press
k
to move
the cursor.
SUN */#/Y
MAY 21 1995 01:35PM
3. Change the date with the ten keypad to
09.
TUE */#/Y
MAY 09 1995 01:35PM
4. Type in the year and time at the keypad
as 9 5 1 0 2 5.
TUE */#/Y
MAY 09 1995 10:25PM
5. Change AM/PM using
∗
or # on the ten
keypad.
TUE */#/Y
MAY 09 1995 10:25AM
6. When the display is correct, press Yes
Function.
Daylight Saving Time
Whenever local custom requires advancing the clock or setting the clock back,
use this feature. You can easily move the clock forwards when daylight saving
time begins, and back when it ends.
❐ When you install the machine for the first time, take care that the setting is
correct before you set the date and time.
1. Press Function 6 2 2 2 2 6 2 and Yes. Y/NEXTk
SELECT LINE
2. Press
k
until the screen is as shown oppo-
site, and then press Yes.
Y/NEXTk
DAYLIGHT TIME ON/OFF
INITIAL SETTINGS APPENDIX A
172