Ricoh 2400L - Manual (Page 704)

2. Display Displays prompts, warnings, and selected modes.
Stamp Key Press to enable or disable the tramsmission.scanning
verification stamp feature.
Function Key Press to use one of the numbered functions explained in this
manual.
Yes/No Keys Use to answer questions on the display.
Scroll Key When an arrow is shown on the display, use this key to access
the options, items, or functions shown by the arrow. Also use it
to move the cursor when programming or editing a displayed
item.
Memory Key If the indicator is lit, your document will be stored before
transmission. If it is not lit, your document will be sent
immediately without being stored. Press the key to change the
mode.
3. Quick Dial Keys Each of these can be programmed with a telephone number, a
group, or a keystroke program. You can also use these keys to
type names and labels such as the RTI and TTI.
User Function Keys Each of these can be programmed for rapid access to frequently
used features. If the light under a key is on, the feature can be
used.
4. Speed Dial Key Press this to dial using Speed Dial feature.
Pause/Redial Key Press this if you need to insert a pause when dialing. Or press
this to redial the last number that was dialed.
On Hook Dial Key Press this to dial without picking up the handset.
Clear Key Use this as a backspace key during programming.
Ten Key Pad Use this as a telephone keypad, or to enter Speed Dial codes.
Energy Saver Key Hold a few seconds this to srart or end the energy saver mode.
Copy Key Press this to copy the document now in the feeder.
Stop Key Press this to stop the machine and return it to standby mode.
Start Key Press this to start fax communication.
O
P
E
R
AT
IO
N
PA
N
E
L
GUIDE TO COMPONENTS OPERATION PANEL
13