Ricoh 2400L - Manual (Page 347)

Switching Authorized Reception On/Off
Before you use Authorized Reception, you have to switch it on using Function 62.
If it is switched off, the machine will accept any incoming fax message.
1. Function 6 2 2 2 2 6 2 and Yes. Y/NEXTk
SELECT LINE
2. Scroll through the list of features with
k
until the screen is as shown opposite.
Y/NEXTk
AUTHORIZED ON/OFF
3. Yes. AUTHORIZED Y/j k
ON kOFF
4. Change the on/off setting by pressing
j
or
k
.
5. Finish: Yes and Function.
Programming the List of the Senders for Authorized Reception
A terminal sending an incoming messages always identifies itself to your terminal.
The identification consists of an RTI code or a CSI code. When you specify the
senders for memory lock, you must program a list of these codes. Program the list
by Function 81 called "Special Terminal" (See page 149.)
Selecting Which Messages to Accept
You can select one of the following two things.
F
Accept incoming messages from the specified senders whose RTI/CSI are
programmed.
F
Accept incoming messages except those from the specified senders whose
RTI/CSI are programmed.
1. Function 6 2 2 2 2 6 3 and Yes. SETTING? Y/j k
PRINT LISTj
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
KPAD/Y/j k
SWITCH 00 :0000 0000
ADV
ANCED
FEA
T
UR
E
S
ADVANCED FEATURES RECEPTION
131